We’ll be closed for the Christmas holidays from 23th Dec. 2024 to 6th Jan. 2025 included. Orders placed after Dec. 18th will be shipped starting 7th January 2025.
Available in stock
Our engineering team have worked on this new project and decided to customise the CL236 by adding a becket.
The basic roller fairlead allows ropes to enter the cleat from above. The advantanges of the becket are:
- The becket holds the end of the rope under the cleat to allow rigging with a 2:1 advantage. It is easier to pull heavy load.
- The becket also holds shockcord and bungee under the cleat.
Available in two finishes:
- CL236/S1 with becket has a silver stove enamel finish for a cost effective, high quality coating.
- CL236AN/S1 with becket has a hard anodised finish to give a harder wearing surface.
Accessories for CL236/S1
- The CL814 Keeper is added to prevent the rope getting caught in the teeth of the cleat. Keepers keep a rope in the cleat, or keep it out of the cleat.
- The Cage CL816 is an accessory that allows ropes to be cleated and uncleated at an angle of up to 70 degrees, rather than only in line with the cleat
- The Clamcleat® CL818 Tapered Pad aids correct rope/cleating alignment. It can allow tensioning without rubbing the rope over the cleat teeth.
Technical Details | Metric | Imperial | |
---|---|---|---|
Rope Diameter | 3 - 5mm | 1/8 - 3/16" | |
Material | Aluminium & Nylon | Aluminium & Nylon | |
Hole Centres | 66mm | 2 5/8" | |
Length | 82mm | 3 1/4" | |
Width | 18mm | 11/16" | |
Height | 25mm | 1" | |
Bolt Size | M5 | #10-24. 3/16" | |
Screw Size | 4.8 | No 10 | |
Weight | 39gms | 1.4oz |